Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

Article-No.: OFLiftPOF1400

Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

(4)
Milling lift retrofit kit for Bosch POF 1400 ACE and 1200 AE Height adjustment through the milling table - simply by cordless screwdriver Made of robust 8mm galvanized steel Scope of delivery: 1 piece router lift retrofit kit The router and the router plate are not included in the scope of delivery. Diameter collet: 65mm Video:...
€24.95
More Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
On hand
Kitchen cabinet hinge repair kit closet cabinet door Kitchen cabinet hinge repair kit closet cabinet door

Article-No.: REPSCHARNIER

Repair kit for kitchen cabinet hinges closet cabinet door

(0)
Repair kit for torn out hinges on defective cabinet doors.Consists of a stainless steel plate with threaded nuts.For easy repair of torn out cabinet hinges. Fits all standard cabinet hinges such as Ikea cabinets. The repair plate fits all cabinets with 32 and 27 mm hole spacing to the cabinet edge (simply turn the plate over). Video instruction
€8.95
More Repair kit for kitchen cabinet hinges closet cabinet door
On hand
All sales hits
  • Banner

Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
  • Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

OFLiftPOF1400
  • Milling lift retrofit kit for Bosch POF 1400 ACE and 1200 AE
  • Height adjustment through the milling table - simply by cordless screwdriver
  • Made of robust 8mm galvanized steel
  • Scope of delivery: 1 piece router lift retrofit kit
  • The router and the router plate are not included in the scope of delivery.
  • Diameter collet: 65mm

Video:

https://www.youtube.com/watch?v=3SZQSdfDims

€24.95
Gross price
Delivery within 5-7 days
Quantity
99513 Article

Description
  • Milling lift retrofit kit for Bosch POF 1400 ACE and 1200 AE
  • Height adjustment through the milling table - simply by cordless screwdriver
  • Made of robust 8mm galvanized steel
  • Scope of delivery: 1 piece router lift retrofit kit
  • The router and the router plate are not included in the scope of delivery.
  • Diameter collet: 65mm
Item Details
OFLiftPOF1400
99513 Article
Comments (4)
Rank
Currently no customer comments
16 other items in the same category:
Milling table top Bosch GTS 10 XC Insert plate Festool OF1400 Milling table top Bosch GTS 10 XC Insert plate Festool OF1400

Article-No.: GTS10XC-OF1400

For Festool OF 1400 router with insert rings Milling table plate Bosch GTS10 XC

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with steel insert plate and aluminum profile rails to fit Bosch circular table saw GTS10XC router Festool OF 1400 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mmHoles suitable for Festool OF 1400Steel plate dimensions: 300mm X 240mm X 3mmScreen...
€135.00
More For Festool OF 1400 router with insert rings Milling table plate Bosch GTS10 XC
On hand
Milling table top Metabo TS 254 Insert plate Bosch GOF 1600 router Milling table top Metabo TS 254 Insert plate Bosch GOF 1600 router

For Bosch GOF 1600 router with insert rings Metabo TS 254 Router table top Circular table saw

(0)
Milling table plate with steel insert plate for Metabo TS 254 & Bosch GOF 1600 router Interchangeable insert rings with hole sizes 50mm 32mm & 25mm Holes fit Bosch GOF 1600 Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate : 24mmScope of delivery: 1 router table plate Video
€135.00
More For Bosch GOF 1600 router with insert rings Metabo TS 254 Router table top Circular table saw
On hand
Router table top GTS635 insert plate Dewalt DW621K router Router table top GTS635 insert plate Dewalt DW621K router

Article-No.: GTS635-DW621K

For Dewalt DW621K router router table top Bosch GTS635 insert plate

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails fits exactly for Bosch table saw GTS635 router Dewalt DW621KHoles fit for Dewalt DW621KDimension steel plate : 300mm X 240mm X 3mmScreen printing plate: 24mmScope of delivery: 1 insert plate and 1 screen printing...
€115.00
More For Dewalt DW621K router router table top Bosch GTS635 insert plate
On hand
Milling table with stop for Metabo FM 18 LTX cordless router Milling table with stop for Metabo FM 18 LTX cordless router

Article-No.: FTFM18LTX

For Metabo FM 18 LTX router table with stop router

(0)
High-quality router table made of galvanized steel with aluminium rip fence, perfect fit for Metabo FM 18 LTX cordless routerThe holes are suitable for the Metabo FM 18 LTX Included is an adjustable rip fence with suction module and sliding cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with C-profile for spring comb - Swivel feet for a...
€195.00
More For Metabo FM 18 LTX router table with stop router
On hand
Router table plate Bosch GTS 635 insert plate Triton JOF001 router Router table plate Bosch GTS 635 insert plate Triton JOF001 router

Article-No.: EinlegePlatteGTS635

Triton JOF001 router table Bosch GTS 635 insert plate

(0)
(Example photos - holes fit for see offer title) Screen printing plate router table with insertion plate steel and aluminum profile rails fit exactly for Bosch table saw GTS 635 & router Triton JOF001 Holes fit for Triton JOF001Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate: 24mmScope of delivery: 1 insert plate and 1 screen printing plate
€110.00
More Triton JOF001 router table Bosch GTS 635 insert plate
On hand
For Bosch GKF 600 router Router table plate with rip fence For Bosch GKF 600 router Router table plate with rip fence

For Bosch GKF 600 router: Router table plate with screen printing stop

(0)
(Example photos - drill holes fit for see offer title) Milling table with steel and aluminum profile rails and aluminum rip fence for Bosch GKF 600 routerIncluded is an adjustable rip fence with suction module and adjustable cheeks Dimension steel plate: 320mm X 200mm X 3mmDimension screen printing plate 780mm X 580mm X 24mmScope of delivery: 1 piece...
€186.00
More For Bosch GKF 600 router: Router table plate with screen printing stop
On hand
Milling table top GTS635 Insert plate Dewalt DWE627KT-OS router Milling table top GTS635 Insert plate Dewalt DWE627KT-OS router

Article-No.: GTS635-DWE627KT-OS

For Dewalt DWE627KT-OS router router table top Bosch GTS635 insert plate

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails fits exactly for Bosch table saw GTS635 router Dewalt DWE627KT-OSHoles fit for Dewalt DWE627KT-OSDimension steel plate : 300mm X 240mm X 3mmScreen printing plate: 24mmScope of delivery: 1 insert plate and 1 screen...
€115.00
More For Dewalt DWE627KT-OS router router table top Bosch GTS635 insert plate
On hand
For Festool OF 1010R router: router table plate with stop screen printing For Festool OF 1010R router: router table plate with stop screen printing

Article-No.: OF-1010R

For Festool OF 1010R router: router table plate with stop screen printing

(0)
(Example photos - holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails and aluminum rip fence exact fit for Festool OF1010R routerHoles fit for Festool OF1010RDimension screen printing plate: 780mm X 580mm X 24mmScope of delivery: 1 piece insert plate and 1 piece screen printing plate 1...
€189.00
More For Festool OF 1010R router: router table plate with stop screen printing
On hand
Milling table with fence for Triton TRA001 MOF001 router Milling table with fence for Triton TRA001 MOF001 router

Article-No.: FTTRA001

Milling table with stop for Triton TRA001 MOF001 router insert rings

(0)
High-quality router table made of galvanized steel with aluminium rip fence for Triton TRA001 MOF001 routerThe holes are suitable for the Triton TRA001 MOF001 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop...
€209.00
More Milling table with stop for Triton TRA001 MOF001 router insert rings
On hand
Steel router table insert with insert rings for Triton TRA 001 MOF 001 router

Article-No.: TRA001

MOUNTING PLATE WITH INSERT RINGS FOR Triton TRA001 MOF001 SURFACE STEEL FRAMING

(0)
Fixing plate insert plate exact fit for Triton TRA001 MOF001 router made of sturdy 3mm steel galvanized with insert rings Interchangeable insert rings with hole sizes 50mm, 32mm & 25mmDimension : 300X240mm The router is not included in the delivery.
€49.00
More MOUNTING PLATE WITH INSERT RINGS FOR Triton TRA001 MOF001 SURFACE STEEL FRAMING
On hand
Router table plate Bosch GTS 635 insert plate Festool OF 1400 router Router table plate Bosch GTS 635 insert plate Festool OF 1400 router

Article-No.: TS254M-TRA

For Triton JOF001 Metabo TS 254 M milling table top table saw

(0)
(Example photos - holes fit for see offer title) Screen printing plate router table with insertion plate steel and aluminum profile rails fit exactly for Bosch table saw GTS 635 & router Festool OF 1400 Holes fit for Festool OF 1400Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate: 24mmScope of delivery: 1 insert plate and 1 screen...
€125.00
More For Triton JOF001 Metabo TS 254 M milling table top table saw
On hand
Milling table top GTS635 insert plate Dewalt DCW620H2-QW router Milling table top GTS635 insert plate Dewalt DCW620H2-QW router

Article-No.: GTS635-DCW620H2-QW

For Dewalt DCW620H2-QW router router table top Bosch GTS635 insert plate

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails fits perfectly for Bosch table saw GTS635 router Dewalt DCW620H2-QWHoles fit for Dewalt DCW620H2-QWDimension steel plate : 300mm X 240mm X 3mmScreen printing plate: 24mmScope of delivery: 1 insert plate and 1 screen...
€115.00
More For Dewalt DCW620H2-QW router router table top Bosch GTS635 insert plate
On hand
Router table plate for MFT/3 multifunction table Einhell TR-RO 1255 E router Router table plate for MFT/3 multifunction table Einhell TR-RO 1255 E router

Article-No.: MFT/3-1010

Router table plate for Festool MFT/3 multifunction table Einhell TR-RO 1255 E router

(0)
(Example photos - holes fit for see offer title) MDF router table top router table with insertion plate steel and aluminum profile rails fit exactly for Festool multifunction table MFT/3 and router Einhell TR-RO 1255 E Drillings fit for Einhell TR-RO 1255 E Made with our CNC portal router Dimension steel plate : 320X200mm X 3mm Scope of...
€179.00
More Router table plate for Festool MFT/3 multifunction table Einhell TR-RO 1255 E router
On hand
Router table plate for MFT/3 multifunction table Festool OF 1010 router with router lift Router table plate for MFT/3 multifunction table Festool OF 1010 router with router lift

Article-No.: MFT/3-1010OL

Router table plate for Festool MFT/3 multifunction table Festool OF 1010 router with router lift

(0)
(Example photos - holes fit for see offer title) MDF router table top router table with insertion plate steel with router lift and aluminum profile rails exact fit for Festool multifunction table MFT/3 and router Festool OF1010 Drillings fit for Festool OF1010 Made with our CNC portal router Dimension steel plate : 320X200mm X 3mm Scope of...
€195.00
More Router table plate for Festool MFT/3 multifunction table Festool OF 1010 router with router lift
On hand