Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

Article-No.: OFLiftPOF1400

Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

(4)
Milling lift retrofit kit for Bosch POF 1400 ACE and 1200 AE Height adjustment through the milling table - simply by cordless screwdriver Made of robust 8mm galvanized steel Scope of delivery: 1 piece router lift retrofit kit The router and the router plate are not included in the scope of delivery. Diameter collet: 65mm Video:...
€24.95
More Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
On hand
Kitchen cabinet hinge repair kit closet cabinet door Kitchen cabinet hinge repair kit closet cabinet door

Article-No.: REPSCHARNIER

Repair kit for kitchen cabinet hinges closet cabinet door

(0)
Repair kit for torn out hinges on defective cabinet doors.Consists of a stainless steel plate with threaded nuts.For easy repair of torn out cabinet hinges. Fits all standard cabinet hinges such as Ikea cabinets. The repair plate fits all cabinets with 32 and 27 mm hole spacing to the cabinet edge (simply turn the plate over). Video instruction
€8.95
More Repair kit for kitchen cabinet hinges closet cabinet door
On hand
All sales hits
  • Banner

Active filters
Milling templates set outer radius with geinde bushings router Milling templates set outer radius with geinde bushings router

Article-No.: SCHAB001

Milling templates set outer radius with geinde bushings for routers 12 radii

(0)
Milling templates set with threaded bushings for the router for rounding corners 3 templates with 4 different radii each. R 3,4,5,6,8,10,12,15,20,22,25,28 Scope of delivery: 3 pcs. milling template made of impact-resistant plastic 4 pcs. adjustment screws Dimension: 2 pcs 125X125X10mm and 1 pcs 145X145X10mm The milling cutter is not included in the...
€35.00
More Milling templates set outer radius with geinde bushings for routers 12 radii
On hand
Router table plate Bosch GTS 635 insert plate Festool OF 1400 router Router table plate Bosch GTS 635 insert plate Festool OF 1400 router

Article-No.: TS254M-OF1400

For Festool OF1400 Metabo TS 254 M milling table top table saw

(0)
(Example photos - holes fit for see offer title) Screen printing plate router table with insertion plate steel and aluminum profile rails fit exactly for Bosch table saw GTS 635 & router Festool OF 1400 Holes fit for Festool OF 1400Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate: 24mmScope of delivery: 1 insert plate and 1 screen...
€125.00
More For Festool OF1400 Metabo TS 254 M milling table top table saw
On hand
Milling table with stop for Festool OF 1400 insert ring router Milling table with stop for Festool OF 1400 insert ring router

Article-No.: FTGOF1400

For Festool OF 1400 router table with stop router with insert rings

(0)
High-quality router table made of galvanized steel with aluminium rip fence to fit Festool OF 1400 routerThe holes are suitable for the Festool OF 1400 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with...
€209.00
More For Festool OF 1400 router table with stop router with insert rings
On hand
Milling table with fence for Festool OF 2200 router with insert rings Milling table with fence for Festool OF 2200 router with insert rings

Article-No.: FTGOF2200

Milling table with stop for Festool OF 2200 router insert rings

(0)
High-quality router table made of galvanized steel with aluminium rip fence to fit Festool OF 2200 routerThe holes are suitable for the Festool OF 2200 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with...
€209.00
More Milling table with stop for Festool OF 2200 router insert rings
On hand
Mounting plate with insert rings for Festool OF 1400 milling table Mounting plate with insert rings for Festool OF 1400 milling table

Article-No.: OF1400Einlege

Mounting plate with insert rings for Festool OF 1400 router steel milling table

(0)
Mounting plate Insert plate for Festool OF 1400 router made of robust 3mm galvanized steel with insert rings Interchangeable insert rings with hole sizes 50mm, 32mm & 25mmDimension : 300X240mm The router is not included in the scope of delivery.
€49.00
More Mounting plate with insert rings for Festool OF 1400 router steel milling table
On hand
Milling table plate Metabo TS 254 Insert plate Festool OF 1010 Upper thread Milling table plate Metabo TS 254 Insert plate Festool OF 1010 Upper thread

For Festool OF 1010 router Metabo TS 254 Router table top Circular table saw

(0)
Milling table plate with steel insert plate for Metabo TS 254 & Festool OF 1010 router Holes fit for Festool OF1010 Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate : 24mmScope of delivery: 1 milling table plate Video
€115.00
More For Festool OF 1010 router Metabo TS 254 Router table top Circular table saw
On hand
Milling table plate Metabo TS 254 Insert plate Festool OF 1010R Upper thread Milling table plate Metabo TS 254 Insert plate Festool OF 1010R Upper thread

For Festool OF 1010 R router Metabo TS 254 Router table top Circular table saw

(0)
Milling table plate with steel insert plate to fit Metabo TS 254 & Festool OF 1010 R router Holes fit for Festool OF1010R Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate : 24mmScope of delivery: 1 milling table plate Video
€115.00
More For Festool OF 1010 R router Metabo TS 254 Router table top Circular table saw
On hand
Milling table plate Metabo TS 254 Insert plate Festool OF 1400 Upper thread Milling table plate Metabo TS 254 Insert plate Festool OF 1400 Upper thread

For Festool OF 1400 router Metabo TS 254 Router table top Circular table saw

(0)
Milling table plate with steel insert plate for Metabo TS 254 & Festool OF 1400 router Drill holes fit for Festool OF1400 Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate : 24mmScope of delivery: 1 milling table plate Video
€115.00
More For Festool OF 1400 router Metabo TS 254 Router table top Circular table saw
On hand
Milling table plate Metabo TS 254 Insert plate Festool OF 1000 Upper thread Milling table plate Metabo TS 254 Insert plate Festool OF 1000 Upper thread

For Festool OF 1000 router Metabo TS 254 Router table top Circular table saw

(0)
Milling table plate with steel insert plate for Metabo TS 254 & Festool OF 1000 router Holes fit for Festool OF1000 Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate : 24mmScope of delivery: 1 milling table plate Video
€115.00
More For Festool OF 1000 router Metabo TS 254 Router table top Circular table saw
On hand
Milling table plate Metabo TS 254 Insert plate Festool OF 2200 Upper thread Milling table plate Metabo TS 254 Insert plate Festool OF 2200 Upper thread

For Festool OF 2200 router with insert rings Metabo TS 254 router table top Circular table saw

(0)
Milling table plate with steel insert plate for Metabo TS 254 & Festool OF 2200 router Interchangeable insert rings with hole sizes 50mm 32mm & 25mm Holes fit Festool OF2200 Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate : 24mmScope of delivery: 1 router table plate Video
€135.00
More For Festool OF 2200 router with insert rings Metabo TS 254 router table top Circular table saw
On hand
Milling table plate Metabo TS 254 Insert plate Festool OF 1400 Upper thread Milling table plate Metabo TS 254 Insert plate Festool OF 1400 Upper thread

For Festool OF 1400 with insert rings Router Metabo TS 254 Router table top Circular table saw

(0)
Milling table plate with steel insert plate for Metabo TS 254 & Festool OF 1400 router Holes fit Festool OF1400 Interchangeable insert rings with hole sizes 50mm 32mm & 25mm Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate : 24mmScope of delivery: 1 router table plate Video
€135.00
More For Festool OF 1400 with insert rings Router Metabo TS 254 Router table top Circular table saw
On hand
For Festool OF1010 router Router table plate with rip fence For Festool OF1010 router Router table plate with rip fence

For Festool OF1010 router: Milling table plate with screen printing stop

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails and aluminum rip fence to fit Festool OF1010 routerIncluded is an adjustable rip fence with suction module and adjustable cheeks Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm Steel plate dimensions:...
€195.00
More For Festool OF1010 router: Milling table plate with screen printing stop
On hand