Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

Article-No.: OFLiftPOF1400

Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

(4)
Milling lift retrofit kit for Bosch POF 1400 ACE and 1200 AE Height adjustment through the milling table - simply by cordless screwdriver Made of robust 8mm galvanized steel Scope of delivery: 1 piece router lift retrofit kit The router and the router plate are not included in the scope of delivery. Diameter collet: 65mm Video:...
€24.95
More Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
On hand
Kitchen cabinet hinge repair kit closet cabinet door Kitchen cabinet hinge repair kit closet cabinet door

Article-No.: REPSCHARNIER

Repair kit for kitchen cabinet hinges closet cabinet door

(0)
Repair kit for torn out hinges on defective cabinet doors.Consists of a stainless steel plate with threaded nuts.For easy repair of torn out cabinet hinges. Fits all standard cabinet hinges such as Ikea cabinets. The repair plate fits all cabinets with 32 and 27 mm hole spacing to the cabinet edge (simply turn the plate over). Video instruction
€8.95
More Repair kit for kitchen cabinet hinges closet cabinet door
On hand
All sales hits
  • Banner

Sales hits

Active filters
Milling table plate Metabo TS 254 M insert plate Metabo 1229 signal router Milling table plate Metabo TS 254 M insert plate Metabo 1229 signal router

Article-No.: TS254M-TRA

For Metabo 1229 Signal router Metabo TS 254 M router table top table saw

(0)
(Example photos - holes fit for see offer title) Router table top with insert plate steel and aluminum profile rails exact fit for Metabo TS 254 M & router Metabo 1229 signal Interchangeable insert rings with hole sizes 50mm 32mm & 25mm Holes fit for Metabo 1229 SignalDimension steel plate : 300mm X 240mm X 3mmMDF plate : 23mmScope of delivery: 1...
€125.00
More For Metabo 1229 Signal router Metabo TS 254 M router table top table saw
On hand
Pedestal Pedestal Pillar EV-Charger for Keba Renault car charging station to set in concrete Pedestal Pedestal Pillar EV-Charger for Keba Renault car charging station to set in concrete

Article-No.: keba2

Pedestal Pedestal Pillar EV-Charger for Keba Renault car charging station to set in concrete

(0)
Pedestal with rain cover suitable for Keba car charging stations- Can be used indoors and outdoors - 4 holes at the base - Integrated cable channel- Height approx. 125 cm.- Weight approx. 10 KgScope of delivery: 1x Pedestal made of sturdy steel, galvanized, powder coated1x Console dowels and screwsThe Keba Wallbox is not included.
€185.00
More Pedestal Pedestal Pillar EV-Charger for Keba Renault car charging station to set in concrete
On hand
Pedestal Pillar EV-Charger for Webasto car charging station Pure and Next Pedestal Pillar EV-Charger for Webasto car charging station Pure and Next

Article-No.: webasto1

Pedestal Pillar EV-Charger for Webasto car charging station Pure and Next

(0)
Pedestal with rain cover suitable for Webasto car charging stations- Can be used indoors and outdoors - 4 holes at the base - Integrated cable duct- Height approx. 125 cm.- Weight approx. 10 KgScope of delivery: 1x pedestal made of sturdy steel, galvanized, powder-coated1x dowel and screwsThe Webasto Wallbox is not included.
€175.00
More Pedestal Pillar EV-Charger for Webasto car charging station Pure and Next
On hand
Pedestal Pillar EV-Charger for Tesla Gen 3 Pedestal Pillar EV-Charger for Tesla Gen 3

Article-No.: TS1

Pedestal Pillar EV-Charger for Tesla Gen 3

(0)
Pedestal with rain cover suitable for Tesla car charging stations- Can be used indoors and outdoors - 4 holes at the base - Integrated cable channel- Height approx. 125 cm.- Weight approx. 10 KgScope of delivery: 1x pedestal made of sturdy steel, galvanized, powder-coated1x dowel and screwsThe Tesla Wallbox is not included.
€149.00
More Pedestal Pillar EV-Charger for Tesla Gen 3
On hand
Router table with fence for Triton TRA001 MOF001 router Router table with fence for Triton TRA001 MOF001 router

Article-No.: FTACE001

Brand: Tuneon

Router table with fence for Triton TRA001 MOF001 router

(0)
High quality router table made of galvanized steel with aluminum rip fence exact fit for Triton TRA001 MOF001 routerThe holes fit the Triton TRA001 MOF001.This is an adjustable rip fence with suction module and sliding cheeks.Dimensions router table : 610mm x 410mm height 420mm- Stop with C-profile for spring comb - Swivel feet for a safe stand, also in...
€225.00
More Router table with fence for Triton TRA001 MOF001 router
On hand
Router table router table for MAKITA RT0700CX2J. KATSU 10175 router screen printing Router table router table for MAKITA RT0700CX2J. KATSU 10175 router screen printing

Article-No.: FTPKATSU10175

For MAKITA RT0700CX2J. KATSU 10175 router router table top screen printing

(0)
(Example photos - holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails fit exactly for MAKITA RT0700CX2J. KATSU 10175 routerBores fit for MAKITA RT0700CX2J. KATSU 10175Scope of supply: 1 piece insert plate and 1 piece screen printing plate
€139.00
More For MAKITA RT0700CX2J. KATSU 10175 router router table top screen printing
On hand
Milling table with fence for Triton TRA001 MOF001 router Milling table with fence for Triton TRA001 MOF001 router

Article-No.: FTTRA001

Milling table with stop for Triton TRA001 MOF001 router insert rings

(0)
High-quality router table made of galvanized steel with aluminium rip fence for Triton TRA001 MOF001 routerThe holes are suitable for the Triton TRA001 MOF001 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm-...
€239.00
More Milling table with stop for Triton TRA001 MOF001 router insert rings
On hand
Milling table top Bosch GTS10 XC Insert plate Bosch GOF 130 router Milling table top Bosch GTS10 XC Insert plate Bosch GOF 130 router

Article-No.: GTS10XC-GOF130

FOR BOSCH GOF 130 ROUTER WITH INSERT RINGS ROUTER TABLE TOP BOSCH GTS10 XC

(0)
Gross price (Example photos - drill holes fit for see offer title) Screen printing plate router table with steel insert plate and aluminum profile rails to fit Bosch circular saw GTS10XC router GOPF 130 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mmHoles fit Bosch GOF 130Steel plate dimensions: 320mm X 200mm X 3mmScreen printing plate:...
€135.00
More FOR BOSCH GOF 130 ROUTER WITH INSERT RINGS ROUTER TABLE TOP BOSCH GTS10 XC
On hand
Insert plate steel router table for Festool OF 1010R router

Article-No.: POF1400

Insert plate steel router table for Festool OF 1010R router

(0)
Fixing plate Insertion plate exact fit for Festool OF 1010R routerDue to the size of the plate, you can easily insert the router from above in their wooden plate or workbench.Holes fit for Festool OF 101Made of sturdy 3mm steel galvanizedDimension : 320X200mmScope of delivery: 1 pcs insertion plateThe router is not included.
€29.95
More Insert plate steel router table for Festool OF 1010R router
On hand