Home page
Sales hits
Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

Article-No.: OFLiftPOF1400

Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

(4)
Milling lift retrofit kit for Bosch POF 1400 ACE and 1200 AE Height adjustment through the milling table - simply by cordless screwdriver Made of robust 8mm galvanized steel Scope of delivery: 1 piece router lift retrofit kit The router and the router plate are not included in the scope of delivery. Diameter collet: 65mm Video:...
€24.95
More Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
On hand
Kitchen cabinet hinge repair kit closet cabinet door Kitchen cabinet hinge repair kit closet cabinet door

Article-No.: REPSCHARNIER

Repair kit for kitchen cabinet hinges closet cabinet door

(0)
Repair kit for torn out hinges on defective cabinet doors.Consists of a stainless steel plate with threaded nuts.For easy repair of torn out cabinet hinges. Fits all standard cabinet hinges such as Ikea cabinets. The repair plate fits all cabinets with 32 and 27 mm hole spacing to the cabinet edge (simply turn the plate over). Video instruction
€8.95
More Repair kit for kitchen cabinet hinges closet cabinet door
On hand
All sales hits

  • Banner

Milling table with fence with Bosch GOF 130
  • Milling table with fence with Bosch GOF 130
  • Milling table with fence with Bosch GOF 130
  • Milling table with fence with Bosch GOF 130
  • Milling table with fence with Bosch GOF 130
  • Milling table with fence with Bosch GOF 130

Frästisch mit Anschlag mit Bosch GOF 130 Oberfräse Oberfräsenlift Einlegeringe

High-quality router table made of galvanized steel, powder-coated with aluminium rip fence with Bosch GOF 130 router

with router lift Height adjustment through the router table - simply using a cordless screwdriver

Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.
Included is an adjustable rip fence with suction module and movable cheeks.

Milling table dimensions:
610mm x 410mm height 420mm


- Stop with C-profile for spring comb
- Swivel feet for a secure stand, also in balance
- Also suitable for mobile use on the construction site
- Good and robust workmanship

Video YouTube

https://www.youtube.com/watch?v=Wbqhf0NWm1M

€395.00
Gross price
Delivery within 5-7 days
Quantity
96 Article

Ask about the product on WhatsApp
Item Details
96 Article
Comments (0)
Rank
Currently no customer comments
15 other items in the same category:
For VW Tiguan 2 aluminum bumper protection powder coated military For VW Tiguan 2 aluminum bumper protection powder coated military

For VW Tiguan 2 aluminum bumper protection powder coated military

(0)
Bumper protection made of powder-coated aluminum in the color style: military Made from 1 mm thick, robust aluminum Neat finish no sharp edges Suitable for all VW Tiguan 2 Scope of delivery: 1 stainless aluminum bumper protection Self-adhesive High-quality 3 m adhesive tape on the back ensures a permanent hold.
€59.00
More For VW Tiguan 2 aluminum bumper protection powder coated military
On hand
Milling table top for Festool MFT/3 multifunction table Dewalt DCW620H2 Milling table top for Festool MFT/3 multifunction table Dewalt DCW620H2

Article-No.: MFT3-DCW620H2-QW

For Dewalt DCW620H2-QW Festool MFT/3 multifunction table milling table top

(0)
(Example photos - drill holes fit for see offer title) MDF router table top router table with insert plate steel and aluminum profile rails to fit Festool multifunction table MFT/3 and router Dewalt DCW620H2-QW Holes fit for Dewalt DCW620H2-QW Made with our CNC portal router Dimension steel plate : 320X200mm X 3mm Scope of delivery: 1 piece of...
€179.00
More For Dewalt DCW620H2-QW Festool MFT/3 multifunction table milling table top
On hand
Milling table top for Festool MFT/3 multifunction table Dewalt DW622K Milling table top for Festool MFT/3 multifunction table Dewalt DW622K

Article-No.: MFT3-DW622K

For Dewalt DW622K Festool MFT/3 multifunction table Milling table top

(0)
(Example photos - drill holes fit for see offer title) MDF router table top router table with insert plate steel and aluminum profile rails to fit Festool multifunction table MFT/3 and router Dewalt DW622K Holes fit for Dewalt DW622K Manufactured with our CNC portal milling machine Dimension steel plate : 320X200mm X 3mm Scope of delivery: 1...
€179.00
More For Dewalt DW622K Festool MFT/3 multifunction table Milling table top
On hand
Lockable cabinet pedestal for Wallbox Heidelberg Lockable cabinet pedestal for Wallbox Heidelberg

Lockable cabinet pedestal for Wallbox Heidelberg

(0)
Wallbox cabinet for floor mounting on concrete or paving.The housing is supplied complete with floor bracket and plugs. The door with cable feed-through is secured against vandalism and unauthorized opening by a lock with key.The charging cable is housed in the box and protected against environmental influences and theft.You can also have additional...
€349.00
More Lockable cabinet pedestal for Wallbox Heidelberg
On hand
Wallbox cabinet Stele for Mennekes car charging station Lockable Wallbox cabinet Stele for Mennekes car charging station Lockable

Wallbox cabinet Stele for Mennekes car charging station Lockable

(0)
Lockable wallbox cabinet for Mennekes car charging stationThe cabinet is supplied fully assembled with a floor bracket for screwing onto concrete or paving. Dowels and screws are included in the scope of delivery.The door with cable entry is secured with a lock against vandalism and theft. The charging cable is protected in the box against environmental...
€349.00
More Wallbox cabinet Stele for Mennekes car charging station Lockable
On hand
PV flat roof system Yes Solar without roof penetration PV flat roof system Yes Solar without roof penetration

Article-No.: SODA220

Flat roof solar panel with bracket garage carport 410Wp

(0)
1 pc Photovoltaic Module JA Solar JAM54S30-410/MR (11BB) 410Wp black FrameThe JA Solar modules are currently among the best modules on the market.1 pc Angle adjustable solar module holder see photoThe holder maximizes your power output and is designed for long-term operation of your solar modules. Module dimensions: 1722 x 1134 x 30 mmPick up at our...
€69.00
More Flat roof solar panel with bracket garage carport 410Wp
On hand
PV Balcony Power Plant Yes Solar with Adjustable Bracket PV Balcony Power Plant Yes Solar with Adjustable Bracket

Article-No.: SODA210

Balcony power plant solar panel with bracket 410Wp

(0)
1 pc Photovoltaic Module JA Solar JAM54S30-410/MR (11BB) 410Wp black FrameThe JA Solar modules are currently among the best modules on the market.1 pc Angle adjustable solar module holder see photoThe holder maximizes your power output and is designed for long-term operation of your solar modules. Module dimensions: 1722 x 1134 x 30 mmPick up at our...
€195.00
More Balcony power plant solar panel with bracket 410Wp
On hand
Drill table for Bosch PBD 40 bench drill Drill table for Bosch PBD 40 bench drill

Article-No.: PBD40T

Drill table for Bosch PBD 40 bench drill

(0)
The drill table can be quickly and easily mounted on the bench drill. Useful accessories such as vice, clamping and stop elements can be freely positioned and clamped without tools. The laser-engraved scale is used to align workpieces or the aluminum fence. The aluminum fence on the table is infinitely adjustable and has a length of 1000 mm, so that...
€119.00
More Drill table for Bosch PBD 40 bench drill
On hand
Wallboxschrank Heidelberg Wallboxschrank Heidelberg

Wallboxschrank Heidelberg

(0)
Lockable wallbox cabinet for Heidelberg car charging stationThe cabinet is supplied fully assembled with a floor bracket for screwing onto concrete or paving. Dowels and screws are included in the scope of delivery.The door with cable entry is secured with a lock against vandalism and theft. The charging cable is protected in the box against environmental...
€349.00
More Wallboxschrank Heidelberg
On hand
Milling table top for Festool MFT/3 multifunction table Dewalt DEW627KT Milling table top for Festool MFT/3 multifunction table Dewalt DEW627KT

Article-No.: MFT3-DEW627KT-OS

For Dewalt DWE627KT-OS Festool MFT/3 multifunction table Milling table top

(0)
(Example photos - drill holes fit for see offer title) MDF router table top router table with insert plate steel and aluminum profile rails to fit Festool multifunction table MFT/3 and router Dewalt DEW627KT-OS Holes fit for Dewalt DEW627KT-OS Manufactured with our CNC portal milling machine Dimension steel plate : 320X200mm X 3mm Scope of...
€179.00
More For Dewalt DWE627KT-OS Festool MFT/3 multifunction table Milling table top
On hand
Milling table top for Festool MFT/3 multifunction table Dewalt D26204K Milling table top for Festool MFT/3 multifunction table Dewalt D26204K

Article-No.: MFT3-D26204K

Milling table plate for Festool MFT/3 multifunction table Dewalt D26204K router

(0)
(Example photos - drill holes fit for see offer title) MDF router table top router table with insert plate steel and aluminum profile rails to fit Festool multifunction table MFT/3 and router Dewalt D26204K Holes fit for Dewalt D26204K Manufactured with our CNC portal milling machine Dimension steel plate : 320X200mm X 3mm Scope of delivery: 1...
€179.00
More Milling table plate for Festool MFT/3 multifunction table Dewalt D26204K router
On hand
Milling table top for Festool MFT/3 multifunction table Dewalt DW621K Milling table top for Festool MFT/3 multifunction table Dewalt DW621K

Article-No.: MFT3-DW621K

For Dewalt DW621K Festool MFT/3 multifunction table Milling table top

(0)
(Example photos - drill holes fit for see offer title) MDF router table top router table with insert plate steel and aluminum profile rails to fit Festool multifunction table MFT/3 and router Dewalt DW621K Holes fit for Dewalt DW621K Manufactured with our CNC portal milling machine Dimension steel plate : 320X200mm X 3mm Scope of delivery: 1...
€179.00
More For Dewalt DW621K Festool MFT/3 multifunction table Milling table top
On hand