Home page
Sales hits
Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

Article-No.: OFLiftPOF1400

Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

(4)
Milling lift retrofit kit for Bosch POF 1400 ACE and 1200 AE Height adjustment through the milling table - simply by cordless screwdriver Made of robust 8mm galvanized steel Scope of delivery: 1 piece router lift retrofit kit The router and the router plate are not included in the scope of delivery. Diameter collet: 65mm Video:...
€24.95
More Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
On hand
Kitchen cabinet hinge repair kit closet cabinet door Kitchen cabinet hinge repair kit closet cabinet door

Article-No.: REPSCHARNIER

Repair kit for kitchen cabinet hinges closet cabinet door

(0)
Repair kit for torn out hinges on defective cabinet doors.Consists of a stainless steel plate with threaded nuts.For easy repair of torn out cabinet hinges. Fits all standard cabinet hinges such as Ikea cabinets. The repair plate fits all cabinets with 32 and 27 mm hole spacing to the cabinet edge (simply turn the plate over). Video instruction
€8.95
More Repair kit for kitchen cabinet hinges closet cabinet door
On hand
All sales hits

  • Banner

Mercedes W124,S124 ab.bj.09.1989 stainless steel door sill repair kit
  • Mercedes W124,S124 ab.bj.09.1989 stainless steel door sill repair kit
  • Mercedes W124,S124 ab.bj.09.1989 stainless steel door sill repair kit

Mercedes W124,S124 ab.bj.09.1989 stainless steel door sill repair kit

A set of repair inlays for Mercedes-Benz series W124, S124 ab bj.09.1989


Complete set for all 4 strips (left and right)made of stainless steel Accurate laser cut


More robust than the original - because instead of aluminum tape, we supply stable strips of stainless steel.



Easy installation:

To install the strips, you can remove your door sill strips, but this is not mandatory. -It also works like this.
 1. Carefully remove the original aluminum tape from the plastic strip.
 2.Clean the surface of the plastic strip.
 3. Remove the protective film on the pre-mounted adhesive strips of the stainless steel strips.
 4. Stick the stainless steel strips flush onto the plastic strip.


Scope of delivery:

A repair kit consisting of 8 precisely fitting elements for a total of 4 door sill strips.
€29.00
Gross price
Delivery within 5-7 days
Quantity
9957 Article

Ask about the product on WhatsApp
Description
A set of repair inlays for Mercedes-Benz series W124, S124 from bj.09.1989


Complete set for all 4 strips (left and right)made of stainless steel Accurate laser cutting
Item Details
9957 Article
Comments (0)
Rank
Currently no customer comments
16 other items in the same category:
Router table top GTS10XC insert plate Dewalt DW621K router Router table top GTS10XC insert plate Dewalt DW621K router

Article-No.: GTS10xc-DW621K

For Dewalt DW621K router router table top Bosch GTS10 XC insert plate

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails fits exactly for Bosch table saw GTS10XC router Dewalt DW621KHoles fit for Dewalt DW621KDimension steel plate : 300mm X 240mm X 3mmScreen printing plate: 24mmScope of delivery: 1 insert plate and 1 screen printing...
€115.00
More For Dewalt DW621K router router table top Bosch GTS10 XC insert plate
On hand
Wallbox cabinet Pedestal Pillar for Keba P40 car charging station Lockable Wallbox cabinet Pedestal Pillar for Keba P40 car charging station Lockable

Article-No.: STSCHKebaP40

Wallbox cabinet Pedestal Pillar for Keba P40 car charging station Lockable

(0)
Lockable wallbox cabinet for Keba car charging stationThe cabinet is supplied with a floor bracket for screwing onto concrete or paving. Dowels and screws are included in the scope of delivery.The door with cable entry is secured with a lock against vandalism and theft. The charging cable is protected in the box against environmental influences and...
€389.00
More Wallbox cabinet Pedestal Pillar for Keba P40 car charging station Lockable
On hand
EV-Charger cabinet Pedestal Pillar for Aurora car charging station Lockable EV-Charger cabinet Pedestal Pillar for Aurora car charging station Lockable

EV-Charger cabinet Pedestal Pillar for Aurora car charging station Lockable

(0)
Lockable wallbox cabinet for Aurora car charging stationThe cabinet is supplied fully assembled with a floor bracket for screwing onto concrete or paving. Dowels and screws are included in the scope of delivery.The door with cable entry is secured with a lock against vandalism and theft. The charging cable is protected in the box against environmental...
€389.00
More EV-Charger cabinet Pedestal Pillar for Aurora car charging station Lockable
On hand
E-car pedestal for VW Elli Connect 2 wallbox with rain cover E-car pedestal for VW Elli Connect 2 wallbox with rain cover

Article-No.: VW-Elli2b

E-car pedestal for VW Elli Connect 2 Wallbox for embedding in concrete

(0)
Pedestal with rain cover suitable for VW Elli Connect 2 car charging stations - Can be used indoors and outdoors - No drilling in the house wall or facade -4 holes at the base -Cable routing through the pipe - Height approx. 130 cm. - Weight approx. 10 kgScope of delivery: 1x sturdy steel pillar, galvanized, powder-coated RAL 7016 1X concrete...
€185.00
More E-car pedestal for VW Elli Connect 2 Wallbox for embedding in concrete
On hand
E-car pedestal for Charge Amps Halo Wallbox with rain cover E-car pedestal for Charge Amps Halo Wallbox with rain cover

Article-No.: ChargeHaloeb

E-car pedestal for Charge Amps Halo Wallbox for embedding in concrete

(0)
Pedestal with rain cover suitable for Charge Amps Halo car charging stations for setting in concrete - Can be used indoors and outdoors - No drilling in the house wall or facade -4 holes at the base -Cable routing through the pipe - Height approx. 130 cm. - Weight approx. 10 kgScope of delivery: 1x sturdy steel column, galvanized, powder-coated RAL...
€185.00
More E-car pedestal for Charge Amps Halo Wallbox for embedding in concrete
On hand
Fiat 500 stainless steel carbon style sill plates

Fiat 500 stainless steel carbon style sill plates

(0)
Stainless steel carbon style sill plates Fits all Fiat 500 Scope of delivery: 2 stainless steelsill plates Precisely cut to fit no cheap yard goods The door sill trim visually enhance your car, and at the same time protect the door sill from the unpleasant bumps and scratches Easy installation with already pre-mounted adhesive tape
€29.00
More Fiat 500 stainless steel carbon style sill plates
On hand
Milling table top GTS635 Insert plate Makita RT0702C router Milling table top GTS635 Insert plate Makita RT0702C router

Article-No.: GTS635-RT0702C

For Makita RT0702C router router table top Bosch GTS635 insert plate

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails fits perfectly for Bosch table saw GTS635 router Makita RT0702CHoles fit for Makita RT0702CDimension steel plate : 300mm X 240mm X 3mmScreen printing plate: 24mmScope of delivery: 1 insert plate and 1 screen printing...
€115.00
More For Makita RT0702C router router table top Bosch GTS635 insert plate
On hand
Multifunction router table plate for Dewalt DW622K with router lift Multifunction router table plate for Dewalt DW622K with router lift

Article-No.: MULTI-DW622K

Router table plate for Dewalt DW622K with router lift

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with steel insert plate and aluminum profile rails, aluminum rip fence and router lift Included is an adjustable rip fence with suction module and adjustable cheeks Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm Scope of delivery: 1 piece screen...
€498.00
More Router table plate for Dewalt DW622K with router lift
On hand
Multifunction router table plate for Bosch GOF 1250 CE router Multifunction router table plate for Bosch GOF 1250 CE router

Article-No.: MULTI-GOF1250

Multifunction router table plate for Bosch GOF 1250 CE router

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate milling table with insert plate steel and aluminum profile rails and aluminum rip fence Included is an adjustable rip fence with suction module and adjustable cheeks Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm Scope of delivery: 1 piece screen printing...
€279.00
More Multifunction router table plate for Bosch GOF 1250 CE router
On hand