Home page
Sales hits
Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

Article-No.: OFLiftPOF1400

Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

(4)
Milling lift retrofit kit for Bosch POF 1400 ACE and 1200 AE Height adjustment through the milling table - simply by cordless screwdriver Made of robust 8mm galvanized steel Scope of delivery: 1 piece router lift retrofit kit The router and the router plate are not included in the scope of delivery. Diameter collet: 65mm Video:...
€24.95
More Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
On hand
Kitchen cabinet hinge repair kit closet cabinet door Kitchen cabinet hinge repair kit closet cabinet door

Article-No.: REPSCHARNIER

Repair kit for kitchen cabinet hinges closet cabinet door

(0)
Repair kit for torn out hinges on defective cabinet doors.Consists of a stainless steel plate with threaded nuts.For easy repair of torn out cabinet hinges. Fits all standard cabinet hinges such as Ikea cabinets. The repair plate fits all cabinets with 32 and 27 mm hole spacing to the cabinet edge (simply turn the plate over). Video instruction
€8.95
More Repair kit for kitchen cabinet hinges closet cabinet door
On hand
All sales hits

  • Banner

Mercedes CL 203 Sportcoupe repair kit stainless steel carbon sill plates
  • Mercedes CL 203 Sportcoupe repair kit stainless steel carbon sill plates
  • Mercedes CL 203 Sportcoupe repair kit stainless steel carbon sill plates
  • Mercedes CL 203 Sportcoupe repair kit stainless steel carbon sill plates

Mercedes CL 203 Sportcoupe repair kit stainless steel carbon sill plates

Rank
Read customer reviews (1)
A set of repair inlays for Mercedes-Benz series CL 203 Sportcoupe


Complete set for all 2 strips (left and right)made of stainless steel Carbon Stainless Accurate laser cut


More robust than the original - because instead of aluminum tape, we supply sturdy strips of stainless steel.



Easy installation:

To install the strips, you can remove your door sill strips, but this is not mandatory. -It also works like this.
 1. Carefully remove the original aluminum tape from the plastic strip.
 2.Clean the surface of the plastic strip.
 3. Remove the protective film on the pre-mounted adhesive strips of the stainless steel strips.
 4. Stick the stainless steel strips flush onto the plastic strip.


Scope of delivery:

A repair kit consisting of 2 precisely fitting elements for a total of 2 door sill strips.
€29.00
Gross price
Delivery within 5-7 days
Quantity
68 Article

Ask about the product on WhatsApp
Description
A set of repair inlays for Mercedes-Benz series CL 203 Sportcoupe


Complete set for all 2 strips (left and right)made of stainless steel Carbon Stainless Accurate laser cut
Item Details
68 Article
Rank
Read customer reviews (1)
Comments (1)
Rank
Currently no customer comments
16 other items in the same category:
Milling table top Bosch GTS 635 Insert plate Bosch GOF 130 router Milling table top Bosch GTS 635 Insert plate Bosch GOF 130 router

Article-No.: GTS635-GOF130

For BOSCH GOF 130 router with insert rings Milling table plate BOSCH GTS 635

(0)
Gross price (Example photos - drill holes fit for see offer title) Screen printing plate router table with steel insert plate and aluminum profile rails to fit Bosch circular saw GTS635 router GOF 130 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mmHoles fit Bosch GOF 130Steel plate dimensions: 320mm X 200mm X 3mmScreen printing plate:...
€135.00
More For BOSCH GOF 130 router with insert rings Milling table plate BOSCH GTS 635
On hand
EV-Charger cabinet Pedestal Pillar for Alfen Eve Single S-line car charging station Lockable EV-Charger cabinet Pedestal Pillar for Alfen Eve Single S-line car charging station Lockable

EV-Charger cabinet Pedestal Pillar for Alfen Eve Single S-line car charging station Lockable

(0)
Lockable wallbox cabinet for Alfen EVE Single car charging stationThe cabinet is supplied fully assembled with a floor bracket for screwing onto concrete or paving. Dowels and screws are included in the scope of delivery.The door with cable entry is secured with a lock against vandalism and theft. The charging cable is protected in the box against...
€389.00
More EV-Charger cabinet Pedestal Pillar for Alfen Eve Single S-line car charging station Lockable
On hand
For Metabo 1229 Signal router Router table plate with rip fence For Metabo 1229 Signal router Router table plate with rip fence

For Metabo 1229 Signal router: Router table plate with screen printing stop

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails and aluminum rip fence to fit Metabo 1229 Signal Router machineIncluded is an adjustable rip fence with suction module and adjustable cheeksDimensions of steel plate: 320mm X 200mm X 3mmDimensions of screen printing...
€186.00
More For Metabo 1229 Signal router: Router table plate with screen printing stop
On hand
Mazda 3 BM BN bj.2014-2018 stainless steel carbon sill plates

Mazda 3 BM BN bj.2014-2018 stainless steel carbon sill plates

(0)
Stainless steel carbon sill trims Suitable for all Mazda 3 BM BN Scope of delivery: 4 stainless steeldoor sill trims Precisely cut no cheap yard goods The sill trims enhance your car visually, and at the same time protect the door sill from the unpleasant dents and scratches Easy installation with already pre-mounted adhesive tape
€29.00
More Mazda 3 BM BN bj.2014-2018 stainless steel carbon sill plates
On hand
For Dewalt DW26204K router workbench base frame For Dewalt DW26204K router workbench base frame

Article-No.: UGDW26204K

Milling table base frame Extremely stable 76X56X90 cm Powder-coated steel

(0)
Workbench base frame made of galvanized steel RAL 7016 powder-coatedBase frame dimensions: 760mm x 560mm height 900mm Suitable for our milling table tops- Swivel feet for a secure stand, even when level- Also suitable for mobile use on the construction site- Good and robust workmanship
€195.00
More Milling table base frame Extremely stable 76X56X90 cm Powder-coated steel
On hand
Milling table top for Festool MFT/3 multifunction table Dewalt DW621K Milling table top for Festool MFT/3 multifunction table Dewalt DW621K

Article-No.: MFT3-DW621K

For Dewalt DW621K Festool MFT/3 multifunction table Milling table top

(0)
(Example photos - drill holes fit for see offer title) MDF router table top router table with insert plate steel and aluminum profile rails to fit Festool multifunction table MFT/3 and router Dewalt DW621K Holes fit for Dewalt DW621K Manufactured with our CNC portal milling machine Dimension steel plate : 320X200mm X 3mm Scope of delivery: 1...
€179.00
More For Dewalt DW621K Festool MFT/3 multifunction table Milling table top
On hand
For Dewalt DCW620H2-QW router Router table plate with rip fence For Dewalt DCW620H2-QW router Router table plate with rip fence

Article-No.: FTDWC620H2-QW

For Dewalt DCW620H2-QW router: Router table plate with screen printing stop

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with steel and aluminum profile rails and aluminum rip fence for Dewalt DCW620H2-QW router Includes an adjustable rip fence with suction module and adjustable cheeks Dimension steel plate: 320mm X 200mm X 3mmDimension screen printing plate 780mm X 580mm X 24mmScope...
€185.00
More For Dewalt DCW620H2-QW router: Router table plate with screen printing stop
On hand
Milling table with fence for Dewalt DW621K insert ring router Milling table with fence for Dewalt DW621K insert ring router

Article-No.: FTDW621K

For Dewalt DW621K router table with stop router

(0)
(Example photos - holes fit for see offer title) High-quality router table made of galvanized steel with aluminium rip fence, perfect fit for Dewalt DW621K routerThe holes are suitable for the Dewalt DW621K Included is an adjustable rip fence with suction module and sliding cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with C-profile...
€209.00
More For Dewalt DW621K router table with stop router
On hand
Milling table top Metabo TS 254 Inlay plate Dewalt D26204K Top plate Metabo TS 254 Milling table top Metabo TS 254 Inlay plate Dewalt D26204K Top plate Metabo TS 254

Article-No.: TS254-D26204K

For Dewalt D26204K Router Metabo TS 254 Router table top Circular table saw

(0)
(Example photos - drill holes fit for see offer title) Milling table plate with steel insert plate to fit Metabo TS 254 & Bosch GKF 18V-8 router Holes fit for Bosch GKF 18V-8 Dimensions of steel plate : 300mm X 240mm X 3mmScreen printing plate : 24mmScope of delivery: 1 router table plate Video
€115.00
More For Dewalt D26204K Router Metabo TS 254 Router table top Circular table saw
On hand
E-car pedestal for Kostal ENECTOR Wallbox with rain cover E-car pedestal for Kostal ENECTOR Wallbox with rain cover

Article-No.: Enector

Pedestal Pillar for Kostal ENECTOR Wallbox

(0)
Pedestal with rain cover suitable for Kostal Enector car charging stations - Can be used indoors and outdoors - No drilling in the house wall or facade -4 drill holes at the base -Cable routing through the pipe - Height approx. 130 cm. - Weight approx. 10 kgScope of delivery: 1x sturdy steel pillar, galvanized, powder-coated RAL 7016 The wallbox is...
€165.00
More Pedestal Pillar for Kostal ENECTOR Wallbox
On hand
Milling table with fence for Dewalt DW622K insert ring router Milling table with fence for Dewalt DW622K insert ring router

Article-No.: FTDW622K

For Dewalt DW622K router table with stop router

(0)
(Example photos - holes fit for see offer title) High-quality router table made of galvanized steel with aluminium rip fence to fit Dewalt DW622K routerThe holes are suitable for the Dewalt DW622K Included is an adjustable rip fence with suction module and sliding cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with C-profile for spring...
€209.00
More For Dewalt DW622K router table with stop router
On hand