Home page
Sales hits
Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

Article-No.: OFLiftPOF1400

Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

(4)
Milling lift retrofit kit for Bosch POF 1400 ACE and 1200 AE Height adjustment through the milling table - simply by cordless screwdriver Made of robust 8mm galvanized steel Scope of delivery: 1 piece router lift retrofit kit The router and the router plate are not included in the scope of delivery. Diameter collet: 65mm Video:...
€24.95
More Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
On hand
Kitchen cabinet hinge repair kit closet cabinet door Kitchen cabinet hinge repair kit closet cabinet door

Article-No.: REPSCHARNIER

Repair kit for kitchen cabinet hinges closet cabinet door

(0)
Repair kit for torn out hinges on defective cabinet doors.Consists of a stainless steel plate with threaded nuts.For easy repair of torn out cabinet hinges. Fits all standard cabinet hinges such as Ikea cabinets. The repair plate fits all cabinets with 32 and 27 mm hole spacing to the cabinet edge (simply turn the plate over). Video instruction
€8.95
More Repair kit for kitchen cabinet hinges closet cabinet door
On hand
All sales hits

  • Banner

Active filters
Milling table with stop for Bosch GOF 1250 router with insert rings Milling table with stop for Bosch GOF 1250 router with insert rings

Article-No.: FTGOF1250

Milling table with stop for Bosch GOF 1250 router insert rings

(0)
High-quality galvanized steel router table with aluminium rip fence for Bosch GOF 1250 routerThe holes are suitable for the Bosch GOF 1250CE Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and sliding cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with C-profile...
€239.00
More Milling table with stop for Bosch GOF 1250 router insert rings
On hand
Milling table with stop for Bosch GOF 1600 router with insert rings Milling table with stop for Bosch GOF 1600 router with insert rings

Article-No.: FTGOF1600

Milling table with stop for Bosch GOF 1600 router insert rings

(0)
High-quality galvanized steel router table with aluminium rip fence for Bosch GOF 1600 routerThe holes are suitable for the Bosch GOF 1600 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with C-profile...
€239.00
More Milling table with stop for Bosch GOF 1600 router insert rings
On hand
Milling table with fence for Bosch POF 1400 ACE 1200 AE router Milling table with fence for Bosch POF 1400 ACE 1200 AE router

Article-No.: FTPOF1400

Milling table with stop for Bosch POF 1400 ACE 1200 AE router insert rings

(0)
High-quality router table made of galvanized steel with aluminium rip fence for Bosch POF 1400 POF 1200 routerThe holes are suitable for the Bosch POF 1400 POF 1200 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height...
€239.00
More Milling table with stop for Bosch POF 1400 ACE 1200 AE router insert rings
On hand
Milling table with stop for Festool OF 1400 insert ring router Milling table with stop for Festool OF 1400 insert ring router

Article-No.: FTGOF1400

For Festool OF 1400 router table with stop router with insert rings

(0)
High-quality router table made of galvanized steel with aluminium rip fence to fit Festool OF 1400 routerThe holes are suitable for the Festool OF 1400 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with...
€239.00
More For Festool OF 1400 router table with stop router with insert rings
On hand
Milling table with fence for Festool OF 2200 router with insert rings Milling table with fence for Festool OF 2200 router with insert rings

Article-No.: FTGOF2200

Milling table with stop for Festool OF 2200 router insert rings

(0)
High-quality router table made of galvanized steel with aluminium rip fence to fit Festool OF 2200 routerThe holes are suitable for the Festool OF 2200 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with...
€239.00
More Milling table with stop for Festool OF 2200 router insert rings
On hand
Milling table with stop for Triton JOF001 router with insert rings Milling table with stop for Triton JOF001 router with insert rings

Article-No.: FTGJOF001

Milling table with stop for Triton JOF001 router insert rings

(0)
High-quality router table made of galvanized steel with aluminium rip fence for Triton JOF001 routerThe holes are suitable for the Triton JOF001 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with C-profile...
€209.00
More Milling table with stop for Triton JOF001 router insert rings
On hand
Milling table with fence for Triton TRA001 MOF001 router Milling table with fence for Triton TRA001 MOF001 router

Article-No.: FTTRA001

Milling table with stop for Triton TRA001 MOF001 router insert rings

(0)
High-quality router table made of galvanized steel with aluminium rip fence for Triton TRA001 MOF001 routerThe holes are suitable for the Triton TRA001 MOF001 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm-...
€239.00
More Milling table with stop for Triton TRA001 MOF001 router insert rings
On hand
Mounting plate with insert rings for Festool OF 1400 milling table Mounting plate with insert rings for Festool OF 1400 milling table

Article-No.: OF1400Einlege

Mounting plate with insert rings for Festool OF 1400 router steel milling table

(0)
Mounting plate Insert plate for Festool OF 1400 router made of robust 3mm galvanized steel with insert rings Interchangeable insert rings with hole sizes 50mm, 32mm & 25mmDimension : 300X240mm The router is not included in the scope of delivery.
€49.00
More Mounting plate with insert rings for Festool OF 1400 router steel milling table
On hand
Milling table with stop for Bosch GOF 130 router with insert rings Milling table with stop for Bosch GOF 130 router with insert rings

Article-No.: FTGOF130

Milling table with stop for Bosch GOF 130 router insert rings

(0)
High-quality galvanized steel router table with aluminium rip fence for Bosch GOF 130 routerThe holes are suitable for the Bosch GOF 130 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with C-profile for...
€239.00
More Milling table with stop for Bosch GOF 130 router insert rings
On hand
Milling table with fence with Bosch GOF 130 Milling table with fence with Bosch GOF 130

Frästisch mit Anschlag mit Bosch GOF 130 Oberfräse Oberfräsenlift Einlegeringe

(0)
High-quality router table made of galvanized steel, powder-coated with aluminium rip fence with Bosch GOF 130 router with router lift Height adjustment through the router table - simply using a cordless screwdriver Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable...
€395.00
More Frästisch mit Anschlag mit Bosch GOF 130 Oberfräse Oberfräsenlift Einlegeringe
On hand
Milling table plate Metabo TS 254 Insert plate Triton TRA - MOF router Milling table plate Metabo TS 254 Insert plate Triton TRA - MOF router

For Triton TRA001 - MOF001 Router Metabo TS 254 Router table top Circular table saw

(0)
Milling table plate with steel insert plate for Metabo TS 254 & Triton TRA - MOF router Interchangeable insert rings with hole sizes 50mm 32mm & 25mm Holes fit for Triton TRA001 - MOF001 Dimension steel plate : 300mm X 240mm X 3mmScreen printing plate : 24mmScope of delivery: 1 router table plate Video
€135.00
More For Triton TRA001 - MOF001 Router Metabo TS 254 Router table top Circular table saw
On hand
Back to top