Home page
Sales hits
Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

Article-No.: OFLiftPOF1400

Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router

(4)
Milling lift retrofit kit for Bosch POF 1400 ACE and 1200 AE Height adjustment through the milling table - simply by cordless screwdriver Made of robust 8mm galvanized steel Scope of delivery: 1 piece router lift retrofit kit The router and the router plate are not included in the scope of delivery. Diameter collet: 65mm Video:...
€24.95
More Router lift retrofit kit for Bosch POF 1400 ACE 1200 AE router
On hand
Kitchen cabinet hinge repair kit closet cabinet door Kitchen cabinet hinge repair kit closet cabinet door

Article-No.: REPSCHARNIER

Repair kit for kitchen cabinet hinges closet cabinet door

(0)
Repair kit for torn out hinges on defective cabinet doors.Consists of a stainless steel plate with threaded nuts.For easy repair of torn out cabinet hinges. Fits all standard cabinet hinges such as Ikea cabinets. The repair plate fits all cabinets with 32 and 27 mm hole spacing to the cabinet edge (simply turn the plate over). Video instruction
€8.95
More Repair kit for kitchen cabinet hinges closet cabinet door
On hand
All sales hits

  • Banner

Wallbox cabinet Pedestal Pillar for Keba P40 car charging station Lockable
  • Wallbox cabinet Pedestal Pillar for Keba P40 car charging station Lockable
  • Wallbox cabinet Pedestal Pillar for Keba P40 car charging station Lockable
  • Wallbox cabinet Pedestal Pillar for Keba P40 car charging station Lockable

Wallbox cabinet Pedestal Pillar for Keba P40 car charging station Lockable

STSCHKebaP40

Lockable wallbox cabinet for Keba car charging station
The cabinet is supplied with a floor bracket for screwing onto concrete or paving.
Dowels and screws are included in the scope of delivery.
The door with cable entry is secured with a lock against vandalism and theft. The charging cable is protected in the box against environmental influences and theft.
There is also space in the box for additional sockets for gardening or charging the e-bike.

The Keba Wallbox is not included in the scope of delivery.

€389.00
Gross price
Delivery within 5-7 days
Quantity
97 Article

Ask about the product on WhatsApp
Item Details
STSCHKebaP40
97 Article
Comments (0)
Rank
Currently no customer comments
16 other items in the same category:
Router table top GTS10XC insert plate Dewalt D26204K router Router table top GTS10XC insert plate Dewalt D26204K router

Article-No.: GTS10xc-D26204K

For Dewalt D26204K router router table top Bosch GTS10 XC insert plate

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails fits exactly for Bosch table saw GTS10XC router Dewalt D26204KHoles fit for Dewalt D26204KDimension steel plate : 300mm X 240mm X 3mmScreen printing plate: 24mmScope of delivery: 1 insert plate and 1 screen printing...
€115.00
More For Dewalt D26204K router router table top Bosch GTS10 XC insert plate
On hand
Router table plate for Bosch GOF 1250 CE with router lift Router table plate for Bosch GOF 1250 CE with router lift

Article-No.: MULTI-GOF1250

Router table plate for Bosch GOF 1250 CE with router lift

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with steel insert plate and aluminum profile rails, aluminum rip fence and router lift Included is an adjustable rip fence with suction module and adjustable cheeks Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm Scope of delivery: 1 piece screen...
€498.00
More Router table plate for Bosch GOF 1250 CE with router lift
On hand
EV-Charger wall cabinet for Tesla gen3 car charging station Lockable EV-Charger wall cabinet for Tesla gen3 car charging station Lockable

Article-No.: WA2202

EV-Charger wall cabinet for Tesla gen3 car charging station Lockable

(0)
Lockable wallbox wall cabinet for Tesla car charging stationThe cabinet is supplied fully assembled for wall mounting.Dowels and screws are included.The door with cable feed-through is secured with a lock against vandalism and theft. The charging cable is protected in the box against environmental influences and theft. The power connection is inaccessible...
€289.00
More EV-Charger wall cabinet for Tesla gen3 car charging station Lockable
On hand
Multifunctional milling table plate for Bosch POF 1400 ACE 1200 AE router Multifunctional milling table plate for Bosch POF 1400 ACE 1200 AE router

Article-No.: MULTI-POF

Multifunction router table plate for Bosch POF 1400 ACE 1200 AE router

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate milling table with insert plate steel and aluminum profile rails and aluminum rip fence Included is an adjustable rip fence with suction module and adjustable cheeks Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm Scope of delivery: 1 piece screen printing...
€279.00
More Multifunction router table plate for Bosch POF 1400 ACE 1200 AE router
On hand

Mercedes W203, S203 repair kit stainless steel carbon sill plates

(0)
A set of repair inlays for Mercedes-Benz series W203 S203 Complete set for all 4 strips (left and right)made of stainless steel Carbon Stainless Accurate laser cut More robust than the original - because instead of aluminum tape, we supply stable strips of stainless steel. Easy installation:To install the strips, you can remove your door sill strips,...
€29.00
More Mercedes W203, S203 repair kit stainless steel carbon sill plates
On hand
Milling table plate Metabo TS 254 M Insert plate Metabo OFV 18 LTX Milling table plate Metabo TS 254 M Insert plate Metabo OFV 18 LTX

Article-No.: GTS10XC-OFV18LTX

For Metabo OFV 18 LTX cordless router with insert rings Milling table plate Bosch GTS10 XC

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with steel insert plate and aluminum profile rails to fit Bosch circular saw GTS10XC router OFV 18 LTX Interchangeable insert rings with hole sizes 50mm, 32mm & 25mmHoles suitable for Bosch POF1200 AE and POF 1400 AESteel plate dimensions: 300mm X 240mm X 3mmScreen...
€135.00
More For Metabo OFV 18 LTX cordless router with insert rings Milling table plate Bosch GTS10 XC
On hand
For Bosch GOF 130 router Router table plate with rip fence For Bosch GOF 130 router Router table plate with rip fence

For Bosch GOF 130 router: Router table plate with screen printing stop

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with insert plate steel and aluminum profile rails and aluminum rip fence to fit Bosch GOF 130 routerIncluded is an adjustable rip fence with suction module and adjustable cheeks Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm Steel plate dimensions:...
€195.00
More For Bosch GOF 130 router: Router table plate with screen printing stop
On hand
For Dewalt DCW620H2-QW router Router table plate with rip fence For Dewalt DCW620H2-QW router Router table plate with rip fence

Article-No.: FTDWC620H2-QW

For Dewalt DCW620H2-QW router: Router table plate with screen printing stop

(0)
(Example photos - drill holes fit for see offer title) Screen printing plate router table with steel and aluminum profile rails and aluminum rip fence for Dewalt DCW620H2-QW router Includes an adjustable rip fence with suction module and adjustable cheeks Dimension steel plate: 320mm X 200mm X 3mmDimension screen printing plate 780mm X 580mm X 24mmScope...
€185.00
More For Dewalt DCW620H2-QW router: Router table plate with screen printing stop
On hand
Milling table with stop for Bosch GOF 1600 router with insert rings Milling table with stop for Bosch GOF 1600 router with insert rings

Article-No.: FTGOF1600

Milling table with stop for Bosch GOF 1600 router insert rings

(0)
High-quality galvanized steel router table with aluminium rip fence for Bosch GOF 1600 routerThe holes are suitable for the Bosch GOF 1600 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table dimensions: 610mm x 410mm height 420mm- Stop with C-profile...
€209.00
More Milling table with stop for Bosch GOF 1600 router insert rings
On hand
Stand E Auto Stele Wallbox Universal for all car charging stations Stand E Auto Stele Wallbox Universal for all car charging stations

Article-No.: SteUni

Stand Pedestal Pillar EV Charger Universal for all Car charging station

(0)
Universal pedestal suitable for all car charging stations with rain cover The charging station is mounted on the column in the same way as on the wall - Can be used indoors and outdoors RAL 7016 powder-coated- 4 holes drilled in the base - Cable routing through the tube- Height approx. 140 cm.- Weight approx. 8 kgScope of delivery: 1x stand pillar...
€165.00
More Stand Pedestal Pillar EV Charger Universal for all Car charging station
On hand
Milling table with stop for Festool OF 1010 insert ring router Milling table with stop for Festool OF 1010 insert ring router

Article-No.: FTOF1010

For Festool OF 1010 router table with stop router with insert rings

(0)
(Example photos - holes fit for see offer title) High-quality router table made of galvanized steel with aluminium rip fence to fit Festool OF 1010 routerThe holes are suitable for the Festool OF 1010 Interchangeable insert rings with hole sizes 50mm, 32mm & 25mm.Included is an adjustable rip fence with suction module and movable cheeks.Milling table...
€209.00
More For Festool OF 1010 router table with stop router with insert rings
On hand